Low pH Buffer for Fracturing Fluids
Description
AUSFRACBUFF 200 is a liquid acidic buffer for application in pH buffering of guar and derivatized guar-based fracturing fluids. AUSFRACBUFF 200 load rates can be modified to provide systems with a pH ranging from 3.0 to 6.0 to meet individual treatment requirements.
Application
AUSFRACBUFF 200 load rates may vary according to the type of activation system being utilized, downhole temperature, and the desired system pH. As a general rule, a load rate of 1.0 gal. (1.89lt) of AUSFRACBUFF 200 per 1000 gal. (3785lt) of fresh water will provide a system pH of approximately 5.0. Testing is strongly recommended with the individual fluid system to provide the desired fluid performance and system pH.
Properties
- Appearance: Clear liquid
- Specific Gravity: 1.08
- pH (10% Solution): 2.0 – 3.0
- Solubility:
- Fresh Water: Soluble
- 15% HCl: Soluble
- Hydrocarbon: Insoluble
Note: All testing should be conducted once the product has been approved for use.
Packaging
Available in 1000L poly totes.
Shipping Information
DOT Shipping Name: UN 2790, Acetic Acid Solution, 8, PG III
Please read and understand the Material Safety Data Sheet (MSDS) before using this product.
Disclaimer: This information is furnished without warranty, expressed or implied, as to accuracy and/or completeness. This information is obtained from various sources including manufacturers and other third-party sources and may not be valid under certain conditions or if this material is used in combination with other materials or in any process. Any final determination of suitability of this material is the sole responsibility of the user.