High Temperature Liquid Oxidizing Breaker
Description
AUSFRACBREAK 400 is a slurry in an environmentally friendly oil (0-BTEX) using an alkaline oxidizer as the active agent. AUSFRACBREAK 400 is used as a delayed breaker for fracturing fluids containing guar or derivatized guar-based fluids at higher temperatures.
Usage
AUSFRACBREAK 400 can be used where an oxidizing agent is needed at temperatures around 250°F (121°C). Note, however, that while AUSFRACBREAK 400 works best at a neutral pH, it is also very effective at an alkaline pH, and as AUSFRACBREAK 400 degrades the polymer, a shift in pH occurs making the fluid more alkaline. Testing is strongly recommended.
Product Features
- Breaker does not activate at ambient temperature.
- Delayed release at temperatures around 220 – 350°F (104 – 177°C)
- Liquid form for ease of addition.
- Environmentally friendly slurry containing 0-BTEX chemicals.
Properties
- Color: Orange liquid slurry
- Active Concentration (lbs./gal.): 1.0
- Density (lbs./gal.): 8.25
- Viscosity: 800 – 2500 cps (Brookfield RVDV)
Note: All testing should be conducted once the product has been approved for use.
Packaging
Available in 1000lt poly totes.
Please read and understand the Material Safety Data Sheet (MSDS) before using this product.
Disclaimer: This information is furnished without warranty, expressed or implied, as to accuracy and/or completeness. This information is obtained from various sources including manufacturers and other third-party sources, and may not be valid under certain conditions or if this material is used in combination with other materials or in any process. Any final determination of suitability of this material is the sole responsibility of the user.