Friction Reducer Additive
Description
AUSFRACSLICK 300 is a high molecular weight copolymer designed to perform well in water-based fracturing fluids, acids, and brines. AUSFRACSLICK 300 is a cationic polymer emulsion useful in various industrial applications, such as industrial water and wastewater clarification, lubrication in drilling mud, thickening, and as a friction reducer additive.
Application & Usage
Recommended dosage levels range from 0.25 – 1.0 gal. (0.95 – 3.785lt) of AUSFRACSLICK 300 per 1000 gal. (3785lt) of water, with a reduction in friction pressures by greater than 60%. Testing is strongly recommended to determine the optimum load rates for each particular use. This product should not be used neat. Use positive displacement pumps (gear or progressive cavity).
Properties
- Colour: Opaque, off-white emulsion
- Ionic Charge: Cationic
- Flash Point: > 200°F / 93°C
- Density (lbs./gal.): 8.65 ± 0.1
- Specific Gravity: 1.02 – 1.05 @ 25°C
- Freezing Point: -18°C
- Viscosity: < 2500 cps @ 25°C
Note: All testing should be conducted once the product has been approved for use.
Storage
AUSFRACSLICK 300 should be stored between 40 and 90°F (4 – 32°C). If freezing occurs, AUSFRACSLICK 300 should be warmed to 40°F (4°C) and agitated prior to subsequent use. AUSFRACSLICK 300 has a shelf life of at least six months in unopened containers.
Packaging
Available in 1000L poly totes and bulk storage.
Please read and understand the Material Safety Data Sheet (MSDS) before using this product.
Disclaimer: This information is furnished without warranty, expressed or implied, as to accuracy and/or completeness. This information is obtained from various sources including manufacturers and other third-party sources and may not be valid under certain conditions or if this material is used in combination with other materials or in any process. Any final determination of suitability of this material is the sole responsibility of the user.